P2664 Dacia Auto Trouble Code
P2664 Dacia Auto Trouble Code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.
The crank but won't start condition, along with the trouble codes may make you think you've got a PATS anti-theft system problem. However, Ford reports that these codes are all related to software bugs. The only way around the problem is to reprogram the PCM with the latest software.
P2664 Dacia Possible Solution:
Excessive air inflow can be caused by a vacuum leak, a dirty sensor or, an exhaust gas recirculation valve not closing properly. If the problem is not enough fuel, the culprit may be dirty injectors or fuel filters, a weak fuel pump or a leaky fuel pressure regulator. The lean fuel mix error may be accompanied by rough idling, engine misfires, hesitation during acceleration and overall poor engine performance.
P2664 Dacia Description For All Models :
- Dacia 1210
- Dacia 1310
- Dacia Dokker
- Dacia Duster
- Dacia Duster Ii
- Dacia Lodgy
- Dacia Logan
- Dacia Logan Ii
- Dacia Nova
- Dacia Sandero
- Dacia Sandero Ii
- Dacia Solenza
- Dacia Stepway
- Dacia Supernova
|
P2664 Dacia Trouble Repair :
When you turn on the ignition, the Service Engine Soon or Check Engine P2664 Dacia light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. You'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the car! |
Code Search
Please fill the search bar to find Auto Trouble Code meaning.